Solution Description

SUNTAE-MOKO  Electric powered Sightseeing Vehicle    
                        
Very first, it is electric powered car, and astonishingly it can be used for sightseeing, golf use, enjoying sunshine! 
                    
one. About regular specification:      
 

 

                      
2. Please ship your usage qualifications to get technical session from our technological section.

Make sure you see films of check and application at our motor branch 
EIFPMG youtube channel  

About SUNTAE Electrical Car Generation Line:

Principal proportions
2.2.1. Length: 2930 mm 2.2.2. Width: 1520 mm 2.2.3. Top: 1550 mm 2.2.4. Wheelbase: 2100 mm 2.2.4.1. Wheelbase sidecar: N.A. 2.2.5. Track width 2.2.5.1. Monitor width front: 1250 mm 2.2.5.2. Track width rear: 1350 mm 2.2.5.3. Keep track of width sidecar: N.A. 2.2.10.6 Floor clearance among the axles: N.A. 2.2.fifteen. Wheelbase to ground clearance ratio: N.A. 2.2.seventeen Seat height: N.A.
Masses
two.1.1. Mass in running get: 433 kg 2.1.2. Genuine mass: 844 kg 2.1.3. Technically permissible maximum laden mass: 1039 kg 2.1.3.1. Technically permissible optimum mass on front axle: 515 kg 2.1.3.2. Technically permissible highest mass on rear axle: 524 kg 2.1.3.3. Technically permissible greatest mass on sidecar axle: N.A. 2.1.7. Technically permissible greatest towable mass: Braked: N.A. Unbraked: N.A. 2.1.7.1. Technically permissible optimum laden mass of the mixture: N.A. 2.1.7.2. Technically permissible greatest mass at the coupling level: N.A.

.1. Make (trade identify of the manufacturer): MOKE, E-MOKE
.2. Kind: JC07-A (CV * Variety): N.A
.2.1. Variant: 00 (CV * Variant): N.A
.2.2. Variation: 00 (CV * Variation): N.A.
.2.3. Business title (if available): JC07 (CV * Commercial name (if available)): N.A
.3. Classification, subcategory and sub-subcategory of car: L7e-CP (CV * Class, subcategory and sub-subcategory of automobile): N.A.
.4. Business identify and tackle of company: JHC New Power Automobile Hong Kong Co., Constrained Space 1501(203), fifteen/F, SPA Centre, fifty three-fifty five Lockhart Road, Wanchai, Hong Kong
.4.2. Name and tackle of manufacturer’s licensed consultant (if any): BURBYS 591 Rue Benoit Mulsant 69400 Villefranche Sur Saone
.5.1. Spot of the manufacturer’s statutory plate(s): L, x one hundred sixty, y 330, z 730
.5.2. Method of attachment of the manufacturer’s statutory plate(s): By riveted
.6. Place of the motor vehicle identification variety: R, x one hundred sixty, y 330, z 730
1. Automobile identification variety: ☆R1AFJZZ0XJJ000008☆
Standard building attributes
one.3. Amount of axles: 2 and wheels: four
one.3.1. Axles with twinned wheels: N.A.
1.3.2. Run axles: F
six.2.4. Superior braking system: Stomach muscles / CBS / Both Stomach muscles and CBS / None:

conforms in all respects to the kind explained in EU sort-acceptance e9*168/2013*11202*00 (variety-acceptance amount like extension amount) (CV*: N.A. variety-acceptance quantity including extension variety) issued on XX, XX, XXXX (date of problem) (CV*: N.A. date of problem) and can be permanently registered in Member States obtaining right/left-hand targeted traffic and using metric/imperial models for the speedometer.

What we will do for you:                        
1. supply specialized specialist just before get and affirm your genuine technological prerequisite in accordance to your description on use inside 1-3 doing work days                        
two. provide the proper and approved below critical top quality inspection program inside ten times(if tailored model,we will recheck the delivery time)                        
3. give complex assistance when the merchandise arrives you, to make certain you can operate it smoothly in real field               
four. supply 1 year guarantee, and whole lifestyle technical support                        
5. constantly update our solution info with you.       

Welcome to Pay a visit to us for Additional Chatting on Method Cooperation on any EV relevant initiatives:

                     
Please follow us at site, , and youtube channel and develop automation and EV purposes up collectively!

 

How to Recognize a Defective Drive Shaft

The most common difficulties related with automotive driveshafts incorporate clicking and rubbing noises. While driving, the sounds from the driver’s seat is frequently obvious. An knowledgeable vehicle mechanic can simply recognize no matter whether the seem is coming from both sides or from one side. If you observe any of these indications, it really is time to ship your car in for a correct prognosis. Here’s a information to determining if your car’s driveshaft is defective:

Symptoms of Driveshaft Failure

If you happen to be obtaining difficulties turning your vehicle, it’s time to examine your vehicle’s driveshaft. A negative driveshaft can limit the overall manage of your vehicle, and you should resolve it as quickly as attainable to avoid even more troubles. Other indicators of a propshaft failure include unusual noises from under the vehicle and trouble shifting gears. Squeaking from beneath the vehicle is one more sign of a faulty driveshaft.
If your driveshaft fails, your auto will quit. Despite the fact that the motor will nonetheless run, the wheels will not turn. You might listen to unusual noises from underneath the automobile, but this is a unusual symptom of a propshaft failure. Nonetheless, you will have a lot of time to correct the dilemma. If you never hear any sounds, the problem is not impacting your vehicle’s ability to move.
The most apparent indications of a driveshaft failure are boring sounds, squeaks or vibrations. If the push shaft is unbalanced, it is probably to damage the transmission. It will need a trailer to eliminate it from your motor vehicle. Aside from that, it can also affect your car’s efficiency and call for repairs. So if you listen to these signs in your vehicle, be sure to have it checked by a mechanic proper away.

Travel shaft assembly

When planning a propshaft, the design should be based mostly on the torque necessary to generate the automobile. When this torque is as well substantial, it can cause irreversible failure of the travel shaft. Therefore, a excellent push shaft style ought to have a lengthy provider existence. Below are some guidelines to help you style a excellent driveshaft. Some of the primary elements of the driveshaft are outlined below.
Snap Ring: The snap ring is a detachable component that secures the bearing cup assembly in the yoke cross gap. It also has a groove for finding the snap ring. Spline: A spline is a patented tubular machined component with a sequence of ridges that match into the grooves of the mating piece. The bearing cup assembly consists of a shaft and end fittings.
U-joint: U-joint is required owing to the angular displacement among the T-shaped housing and the pinion. This angle is especially large in lifted 4x4s. The design and style of the U-joint should guarantee a constant rotational pace. Proper driveshaft design must account for the distinction in angular velocity among the shafts. The T-bracket and output shaft are hooked up to the bearing caps at each finishes.

U-joint

Your motor vehicle has a set of U-joints on the driveshaft. If your car demands to be changed, you can do it your self. You will want a hammer, ratchet and socket. In buy to remove the U-joint, you should first remove the bearing cup. In some situations you will need to have to use a hammer to remove the bearing cup, you need to be careful as you do not want to harm the travel shaft. If you are not able to get rid of the bearing cup, you can also use a vise to press it out.
There are two sorts of U-joints. 1 is held by a yoke and the other is held by a c-clamp. A entire ring is safer and excellent for cars that are frequently utilized off-street. In some instances, a complete circle can be employed to mend a c-clamp u-joint.
In addition to abnormal torque, excessive loads and improper lubrication are frequent leads to of U-joint failure. The U-joint on the driveshaft can also be broken if the engine is modified. If you are driving a motor vehicle with a intensely modified engine, it is not adequate to substitute the OE U-joint. In this circumstance, it is important to get the time to correctly lubricate these components as essential to keep them useful.

tube yoke

QU40866 Tube Yoke is a typical substitution for damaged or damaged driveshaft tubes. They are desirably created of a metallic materials, this kind of as an aluminum alloy, and incorporate a hollow portion with a lug construction at one particular stop. Tube yokes can be created using a range of techniques, such as casting and forging. A typical method includes drawing solid factors and machining them into the last shape. The ensuing factors are significantly less high-priced to make, specially when in comparison to other forms.
The tube fork has a link level to the driveshaft tube. The lug structure gives attachment factors for the gimbal. Normally, the driveshaft tube is 5 inches in diameter and the lug structure is 4 inches in diameter. The lug composition also serves as a mounting stage for the generate shaft. After mounted, Tube Yoke is easy to preserve. There are two sorts of lug structures: 1 is forged tube yoke and the other is welded.
Heavy-responsibility collection generate shafts use bearing plates to protected the yoke to the U-joint. All other dimensions are secured with external snap rings. Yokes are generally machined to accept U-bolts. For some programs, grease fittings are employed. This attachment is a lot more suitable for off-road cars and functionality vehicles.

conclude yoke

The end yoke of the drive shaft is an integral component of the push prepare. Selecting a substantial-quality stop yoke will aid make certain lengthy-expression procedure and avoid untimely failure. Pat’s Driveline offers a full line of automotive finish yokes for power just take-offs, differentials and auxiliary gear. They can also evaluate your current elements and provide you with high good quality replacements.
A U-bolt is an industrial fastener with threaded legs. When utilised on a driveshaft, it gives increased balance in unstable terrain. You can buy a U-bolt kit to secure the pinion provider to the generate shaft. U-bolts also appear with lock washers and nuts. Functionality autos and off-highway cars frequently use this type of attachment. But just before you set up it, you have to make confident the yoke is machined to settle for it.
Finish yokes can be manufactured of aluminum or metal and are designed to offer strength. It also offers specific bolt styles for a variety of programs. CZPT’s drivetrain is also stocked with a complete line of automotive flange yokes. The organization also creates personalized flanged yokes for several popular brand names. Because the company has a extensive line of replacement flange yokes, it can aid you rework your drivetrain from non-serviceable to serviceable.

bushing

The very first step in fixing or changing an automotive driveshaft is to change worn or damaged bushings. These bushings are situated inside of the drive shaft to provide a easy, secure ride. The shaft rotates in a rubber sleeve. If a bushing demands to be replaced, you must very first verify the guide for tips. Some of these factors could also need to be changed, such as the clutch or swingarm.