Solution Description

SUNTAE-MOKO  Electric powered Sightseeing Vehicle    
                        
1st, it is electric powered car, and surprisingly it can be applied for sightseeing, golf use, taking pleasure in sunshine! 
                    
one. About common specification:      
 

                      
2. Make sure you deliver your use track record to get technological consultation from our technological division.

Please see videos of test and software at our motor branch 
EIFPMG youtube channel  

About SUNTAE Electric Vehicle Production Line:

 Main dimensions
2.2.1. Size: 2930 mm 2.2.2. Width: 1520 mm 2.2.3. Top: 1550 mm 2.2.4. Wheelbase: 2100 mm 2.2.4.1. Wheelbase sidecar: N.A. 2.2.5. Monitor width 2.2.5.1. Track width front: 1250 mm 2.2.5.2. Observe width rear: 1350 mm 2.2.5.3. Keep track of width sidecar: N.A. 2.2.ten.6 Ground clearance among the axles: N.A. 2.2.fifteen. Wheelbase to ground clearance ratio: N.A. 2.2.17 Seat peak: N.A.
Masses
two.1.1. Mass in working order: 433 kg 2.1.2. Real mass: 844 kg 2.1.3. Technically permissible maximum laden mass: 1039 kg 2.1.3.1. Technically permissible highest mass on entrance axle: 515 kg 2.1.3.2. Technically permissible highest mass on rear axle: 524 kg 2.1.3.3. Technically permissible maximum mass on sidecar axle: N.A. 2.1.7. Technically permissible greatest towable mass: Braked: N.A. Unbraked: N.A. 2.1.7.1. Technically permissible optimum laden mass of the combination: N.A. 2.1.7.2. Technically permissible maximum mass at the coupling position: N.A.

.1. Make (trade title of the maker): MOKE, E-MOKE
.2. Variety: JC07-A (CV * Sort): N.A
.2.1. Variant: 00 (CV * Variant): N.A
.2.2. Version: 00 (CV * Variation): N.A.
.2.3. Industrial name (if offered): JC07 (CV * Industrial title (if offered)): N.A
.3. Group, subcategory and sub-subcategory of motor vehicle: L7e-CP (CV * Class, subcategory and sub-subcategory of vehicle): N.A.
.4. Company identify and deal with of maker: JHC New Vitality Vehicle Hong Kong Co., Restricted Place 1501(203), fifteen/F, SPA Centre, fifty three-55 Lockhart Street, Wanchai, Hong Kong
.4.2. Name and address of manufacturer’s approved representative (if any): BURBYS 591 Rue Benoit Mulsant 69400 Villefranche Sur Saone
.5.1. Spot of the manufacturer’s statutory plate(s): L, x 160, y 330, z 730
.5.2. Technique of attachment of the manufacturer’s statutory plate(s): By riveted
.6. Area of the vehicle identification variety: R, x a hundred and sixty, y 330, z 730
1. Motor vehicle identification amount: ☆R1AFJZZ0XJJ000008☆
Standard design characteristics
1.3. Variety of axles: 2 and wheels: four
1.3.1. Axles with twinned wheels: N.A.
one.3.2. Driven axles: F
6.2.4. Superior braking program: Abdominal muscles / CBS / Each Stomach muscles and CBS / None:

conforms in all respects to the kind described in EU type-acceptance e9*168/2013*11202*00 (sort-approval quantity including extension quantity) (CV*: N.A. sort-acceptance variety which includes extension quantity) issued on XX, XX, XXXX (day of concern) (CV*: N.A. date of issue) and can be completely registered in Member States getting correct/still left-hand traffic and using metric/imperial units for the speedometer.

What we will do for you:                        
1. give technical specialist before purchase and validate your actual technological need in accordance to your description on use inside of 1-3 working days                        
2. source the appropriate and accredited beneath critical quality inspection program within 10 days(if custom-made model,we will recheck the shipping and delivery time)                        
three. provide complex assist when the item arrives you, to make certain you can operate it efficiently in genuine field               
4. offer 1 year warranty, and total existence complex support                        
five. always update our merchandise info with you.       

Welcome to Visit us for More Conversing on Approach Cooperation on any EV relevant initiatives:

                     
Remember to follow us at site, , and youtube channel and expand automation and EV programs up with each other!

What is a driveshaft and how much does it value to substitute one particular?

Your automobile is manufactured up of many shifting elements. Knowing every single portion is essential simply because a broken driveshaft can seriously injury other elements of the auto. You may possibly not know how crucial your driveshaft is, but it is essential to know if you want to repair your automobile. In this report, we are going to go over what a driveshaft is, what its symptoms are, and how considerably it fees to exchange a driveshaft.

Repair damaged driveshafts

A ruined driveshaft does not allow you to turn the wheels freely. It also exposes your motor vehicle to larger mend fees thanks to ruined driveshafts. If the drive shaft breaks although the auto is in movement, it could cause a crash. Also, it can substantially impact the overall performance of the auto. If you will not resolve the issue right away, you could danger much more pricey repairs. If you suspect that the drive shaft is broken, do the subsequent.
Very first, make positive the generate shaft is safeguarded from dust, humidity, and dust. A correct driveshaft cover will stop grease from accumulating in the driveshaft, reducing the chance of even more harm. The grease will also cushion the metal-to-steel make contact with in the consistent velocity joints. For instance, hitting a soft material is better than hitting a steel wall. A ruined prop shaft can not only trigger difficult cornering, but it can also trigger the vehicle to vibrate, which can further injury the relaxation of the drivetrain.
If the driveshaft is ruined, you can decide on to fix it your self or take it to a mechanic. Normally, driveshaft repairs expense around $200 to $300. Parts and labor may possibly vary primarily based on your automobile variety and variety of fix. These components can expense up to $600. Nonetheless, if you will not have a mechanical background, it is greater to go away it to a specialist.
If you notice that one of the two generate shafts is worn, it is time to repair it. Worn bushings and bearings can trigger the travel shaft to vibrate unnecessarily, leading to it to split and lead to further harm. You can also check the middle bearing if there is any enjoy in the bearing. If these signs take place, it is ideal to get your car to a mechanic as quickly as attainable.

Discover about U-joints

Although most vehicles have at least a single variety of U-joint, there are other kinds obtainable. CV joints (also known as scorching rod joints) are used in a selection of programs. The slight axis is shorter than the major axis on which the U-joint is situated. In both circumstances, the U-joints are lubricated at the manufacturing facility. During servicing, the generate shaft slip joint need to be lubricated.
There are two principal types of U-joints, which includes solid and press match. They are generally held in place by C-clamps. Some of these U-joints have knurls or grooves. When choosing the right fitting, be sure to evaluate the entire fitting. To make confident you get the appropriate measurement, you can use the measurement chart or verify the guide for your certain design.
In addition to lubrication, the situation of the U-joint ought to be checked frequently. Lubricate them routinely to stay away from premature failure. If you hear a clicking audio when shifting gears, the u-joint place may be misaligned. In this case, the bearing may need to have to be serviced. If there is inadequate grease in the bearings, the common joint might need to be replaced.
U-joint is an crucial element of the car transmission shaft. Without them, your automobile would have no wheeled suspension. Without them, your motor vehicle will have a rickety front stop and a wobbly rear finish. Simply because vehicles can not travel on extremely-flat surfaces, they need to have flexible driveshafts. The U-joint compensates for this by making it possible for it to move up and down with the suspension.
A correct inspection will decide if your u-joints are unfastened or worn. It must be straightforward to pull them out. Make sure not to pull them all the way out. Also, the bearing caps should not go. Any signs of roughness or wear would show a need for a new UJ. Also, it is essential to notice that worn UJs cannot be repaired.

Indicators of Driveshaft Failure

One particular of the most widespread problems related with a defective driveshaft is problems turning the wheels. This seriously limitations your all round management in excess of the car. Luckily, there are many signs that could indicate that your driveshaft is failing. You should take quick actions to establish the cause of the difficulty. One of the most frequent causes of driveshaft failure is a weak or faulty reverse gear. Other typical brings about of driveshaft harm incorporate driving too difficult, obtaining stuck in reverse gear and differential lock.
Yet another signal of a unsuccessful driveshaft is strange sound whilst driving. These noises are generally the end result of dress in on the bushings and bearings that help the drive shaft. They can also result in your vehicle to screech or scratch when switching from push to idle. Relying on the speed, the sound might be accompanied by vibration. When this takes place, it is time to ship your motor vehicle in for a driveshaft substitute.
One of the most frequent symptoms of driveshaft failure is visible jitter when accelerating. This could be a indication of a unfastened U-joint or worn middle bearing. You should extensively examine your car to decide the cause of these seems and corresponding signs. A qualified mechanic can assist you establish the result in of the noise. A destroyed propshaft can seriously limit the drivability of the vehicle.
Normal inspection of the push shaft can stop critical harm. Relying on the hurt, you can replace the driveshaft for everywhere from $five hundred to $1,000. Depending on the severity of the damage and the level of repair, the expense will count on the amount of elements that want to be replaced. Do not generate with a poor driveshaft as it can result in a significant crash. There are a number of methods to steer clear of this issue fully.
The initial symptom to look for is a worn U-joint. If the U-joint arrives free or moves way too much when making an attempt to turn the steering wheel, the driveshaft is faulty. If you see obvious rust on the bearing cap seals, you can take your car to a mechanic for a extensive inspection. A worn u-joint can also point out a problem with the transmission.

The price of replacing the generate shaft

Depending on your state and services center, a driveshaft repair can value as tiny as $three hundred or as substantial as $2,000, based on the specifics of your car. Labor costs are typically close to $70. Costs for the components on their own variety from $four hundred to $600. Labor expenses also vary by model and vehicle make. In the end, the determination to mend or substitute the driveshaft will depend on whether you need a swift auto mend or a total auto repair.
Some cars have two separate driveshafts. 1 goes to the entrance and the other goes to the again. If your vehicle has 4 wheel travel, you will have two. If you might be changing the axles of an all-wheel-drive car, you’ll need a particular component for each axle. Deciding on the incorrect one can outcome in far more costly repairs. Just before you start off purchasing, you must know precisely how a lot it will price.
Based on the variety of vehicle you very own, a driveshaft substitution will price in between PS250 and PS500. Luxurious vehicles can value as a lot as PS400. However, for protection and the total overall performance of the vehicle, replacing the driveshaft could be a essential mend. The value of changing a driveshaft relies upon on how long your automobile has been on the road and how a lot dress in and tear it has seasoned. There are some symptoms that point out a defective drive shaft and you need to just take quick action.
Repairs can be expensive, so it’s best to employ a mechanic with encounter in the subject. You will be paying hundreds of bucks a thirty day period, but you may have peace of mind understanding the job will be accomplished appropriate. Don’t forget that you could want to request a buddy or family members member to assist you. Dependent on the make and design of your automobile, changing the driveshaft is much more high-priced than changing the components and carrying out it by yourself.
If you suspect that your push shaft is destroyed, be positive to correct it as soon as possible. It is not a good idea to travel a vehicle with abnormal vibration and audio for a lengthy time. The good news is, there are some rapid methods to resolve the dilemma and avoid costly repairs afterwards. If you have observed the signs and symptoms above, it truly is worth obtaining the job done. There are several symptoms that your driveshaft could need to have support, which includes absence of power or issues relocating the car.